|
Functions
|
Description
|
Software
upgrade function
|
A function to upgrade the inverter's software |
Standard
configuration of communication function
|
RS232C/RS485 standard configuration
(no options needed) |
| |
Anti
¨Cbreakdown function
|
Operation time for anti-breakdown can be set |
Output
frequency range spreading function
|
Output frequency: 0.05Hz-600Hz |
| |
Multifunctional
output and input terminals
|
Users can set the output and input terminals freely. |
Analog
output function
|
Two 0-10V analog signal outputs |
Multifunctional
relay output
|
Add same functions as in multifunctional output
terminals to alarm relay. |
Analog
frequency input command
|
0-10V and 4-20mA analog signal inputs can be converted
to each other. |
Power
supply for users
|
Provide 24V 150mA power supply |
| |
User's
initialization data
|
The user is allowed to set initialization data. |
Changed
code display function
|
This function displays data values in current
code data that are different from the factory presets and user's
initialization data. |
Function
code data copy function
|
Function code data can be copied to multiple inverters
with a operation panel. |
|
Shortest
operation time compensation function
|
The operation is enabled in the shortest set time
even if the operation times specified by different codes are
not equal. |
Password
function
|
The user is allowed to set the password
enabling continuous use of the machine. |
Missing
phase detection function
|
Missing input or output phase can be detected
by specifying different function codes. |
V.f
separate function
|
V.f comparison and complete separation |
V/f
pattern function
|
The user is allowed to set V/f curve by use of
multiple voltage and frequency setting points. |
Cooling
FAN lock inspection function
|
Lock of cooling fan caused by fault, external
reasons can be inspected. |
|
Constant
pressure water supply system control
|
Fixed mode, cycling mode, scheduled switch, pump
switch by external terminals |
Rolling
machine control function
|
Can be used to control drawbench, rolling machine,
twist machine, etc. |
| Position
control |
The optional board SB-PG can be used
to control positioning. |
